Honda Hon66 smart locksmith Нonda Hon66 lock pick decoder tool

Honda Hon66 smart locksmith is obd2tuning Honda Locksmith Tools. Hon da Hon66 2 in 1 auto pick and decoder Found on: Hon da and Acura. Hon da Hon66 auto lock pick decoder tool with LED 

Light.Honda Hon66 Smart locksmith Honda Hon66 auto pick and decoder tool

Honda Hon66 auto key pick Honda Hon 66 car key Decoder

Hon da Hon66 Smart 2 in 1 found on: Hon da and Acura

The first 4 spaces in this door lock have split wafers and position 5 is a one piece wafer.
Position 1 in this lock is read only by the "B" side of the decoder....
Side "A" will not pick or read anything in this position
Side "A" does not pick or decode in positions:1,5 and 6
Side "B" does not pick or decode in positions 6
All wafers(Tumblers) are stamped/numbered
To decode the lock read in the SAME direction as it was picked
The lock has to be picked twice first pick and turn appromimately 45 degrees
The pick again to the 90 degrees, the lock has to be in this position to decode
once the lock is decoded, you can turn it back to the 45 degree position and the it has to be picked back to the upright(vertical) position before you can remove the tool:

If you are using Genericode to fill in the gaps

Enter what you read as the "A" axis in the Top row and what you read as the "B" axis in the BottoM row.

If you are using Instacode to fill in the gaps...
Once you have decoded the lock and before entering the cuts into  Inststacode for the remaining cuts. transpose the letter "A" fo the letter "B"

The detail of Honda Hon66 2-in-1 Decoder and pick tool as follow:

Open Sequence:

1: First pick the lower left 1 piece wafer, and then pick the top right 2 pieces wafers
2: Pick the upper left 2 pieces wafers and then pick the lower right 3 pieces wafers.
After the lock cylinder turn around to 45 degree there still have 3 pieces wafers stuck
3: After then pick the lower left 1 wafer and top right 2 pieces wafers, and then the lock cylinder be opened.
4 at the same tiem the lock cylinder need to go back to the original position then need to pick 3 pieces wafers.
Pick the lower left 2 wafer and then pick the top right 2 pieces wafers. after then the lock cylinder back to the original position. so the unlock work is complete

Decoder sequence:

First read the lower left 1 piece wafer. and then read the top right 2 pieces wafers.
and after then read the uppper left 2 pieces wafers. Finally read the lower right 3 pieces wafers, after finish reading then use the key cutter to cut the special key which only use for 2-in-1 decoder and pick tool. Finish all cutting then an unbroken key have been made and it can use for open the lock.
Honda Hon66 can open the Honda 2.4 hon da Accord, Odyssey,eighth-generation accord, BYD F6 models.

Note

User's Manual